Create New Estimate Profile

Use the Estimating section of the Settings page in Mitchell Connect to create or add a new estimate profile.

How to

  1. On the navigation pane in Mitchell Connect, click Settings.
  2. On the Estimating card, click Estimate Profiles.
  3. The Estimate Profiles you have already created are visible. Click + Estimate Profile.

  4. In the General tab, type the Profile Name and Description in the appropriate fields.
  5. If applicable, enter the applicable information in the following fields:
    • Legislation Province
    • Total Loss Threshold
    • Primary Template
  6. Click each tab and add the necessary information to the profile. Tabs include General, Labor/Tax Rules, Calculations, Adjustments, Messages and Remarks, Print Preferences, and Parts.
  7. When you are finished making changes, click Save.
  1. On the navigation pane in Mitchell Connect, click Settings.
  2. On the Estimating card, click Alternate Part Profiles.
  3. Click + Parts Profile.
  4. Type a profile name and description. Set an optional default profile location.
  5. Click Save and Next: Aftermarket.

  6. Select Yes to enable aftermarket parts in the profile. Deselect any items that you do not want to be included as an aftermarket parts option.
  7. Click Save And Next: Select Vendors.

  8. Click + Add Vendors to add new aftermarket parts vendors.
  9. Click Save and Next: Recycled Parts.

  10. Select Yes to enable recycled parts in the profile. Deselect any items that you do not want to be included as a recycled parts option.
  11. Click Save And Next: Select Vendors.

  12. Click + Add Vendors to add new recycled parts vendors.
  13. Click Save And Review.

  14. Check the profile overview and click Done when you are finished.

    The new alternate parts profile is on the Alternate Part Profiles page.

  1. In the Estimate Profile, click the Labor/Tax Rules tab. Click Edit.
  2. In the Labor Rates section, type the dollar amount for each labor type and/or specify a user-defined name for the fields with the editable pencil icon next to them (such as User Defined 1 or Carbon Fiber).

    Tip: You can rename the User Defined and Carbon Fiber labels up to a length of fifty characters and used throughout estimation (e.g., when adding a Manual Line, you can select one of these labels in the Type drop-down for their unique labor rates which then shows on the Estimate PDF and Delta Report).

  3. Enter the ATS (Alternative Transportation Service) rate in the ATS Rate field to calculate the ATS allowance amount reimbursed to the repair facility (if applicable).
  4. In the Taxes section, select either Flat Tax or Tiered Tax.
    1. For Flat Tax, select the options that the flat tax applies to: Labor and/or Parts & Costs. Enter the tax percentages for Labor Tax and Parts & Costs Tax in the appropriate fields.
    2. For Tiered Tax, enter the percentage and dollar threshold.

    If a lookup table with a customized and populated Tax Type or Tiered Tax type field was created in WorkCenter, the results can be dynamically fetched and displayed in the Taxes section of the Labor/Tax Rules tab. See the WorkCenter Online Product Help Documentation for additional information.

    Note: In some Canadian provinces and US states, the sales tax may have up to four decimal places. Enter the value with four decimals in the GST/ PST, HST, Labor Tax, and Parts & Costs fields as needed.

  5. In the Taxable Settings section, select the applicable items in the Labor, Parts, and Additional Costs categories.

    6. The Labor, Parts, and Additional Costs categories can be disabled on the estimate if desired. If you do so, an X indicates that taxes are not applied to that category.


  6. Once all selections and entries have been made, click Save.

Log in to Mitchell Connect as a user with the CAN country code and Create a New Estimate Profile.

  1. Click Labor/ Tax Rules and add the labor rates. Next to Tax Configuration, GST is selected by default. In Canadian provinces where HST is used, a profile admin needs to select the HST option. The PST and GST settings are hidden when HST is selected. This is due to HST (Harmonized Sales Tax), which includes both PST and GST.

  1. Open an estimate and apply the new estimate profile to the estimate. When repair lines are added to the estimate, the tax label will be applied to the Labor, Parts and Gross Totals sections of the Estimate Totals.

You can also see the tax labels in the Total Breakdown in the top right corner.

Note: For additional information on any of these settings, please review the Reference section at the bottom of the page.

  1. In the Estimate Profile, click the Calculations tab.

  2. In the Refinish Calculations section, review the default percentages and units for the refinish items and edit them if necessary.

    The refinish adjustment you set in the Estimate Profile, can be applied when you modify any refinish lines in the estimate. The refinish adjustment reduces or increases the refinish time provided by the Collision Estimating Guide (CEG).

    From the base refinish, configure the following percentage and/or unit options:

  • Clear Coat

  • Three Stage

  • Two Tone

  • Blend

  • Finish Sand & Buff

  • De-Nib & Finesse

  • Refinish Adjustment

  1. In the Paint / Material Calculation Rates section, type the rate for paint, shop materials, and Hazardous Waste.
  2. In the Paint / Material Included Options section, configure the applicable options:

  • Non Repair Lines – Include or exclude non-repair lines when calculating shop materials. Refinish lines are excluded.
  • Paint Limit Explanation Lines – Include or exclude an explanation line when paint limit is exceeded.
  • Clear Coat Labor Time – Include or exclude Clear Coat Labor Time for Interior Structures. This setting does not apply for Commercial Vehicles.

  1. In the Paintless Dent Repair (PDR) section, configure the applicable options:
    • Automatic PDR Explanation Lines – Automatically Include or exclude PDR explanation lines when PDR repair lines exist.
    • Automatic PDR Sublet Adjustment – Automatically apply adjustment rate on PDR sublet lines. Ensure the Adjustments tab has the Sublet part adjustment percentage set on the same Estimate Profile.
  2. In the Diagnostics and Calibration section, configure the applicable options:
    • Recommended Calibration Lines – Automatically include or exclude recommended calibration lines.
  3. In the Repair Breakeven section, configure the applicable options:
    • Repair Breakeven Minimum Threshold – Set a minimum percentage threshold (between 50% to 100%) for recommending Remove & Replace (R&R) instead of a Repair labor operation. By default, it is set to 100% but can be changed as desired.
  4. When you are finished making changes, click Save.

 

The set threshold value will be used when the total clear coat is calculated for all repair lines. Mitchell Cloud Estimating will not allow the clear coat value to be higher than the threshold value set in the estimate profile. On the estimate page, preview, and printout, an asterisk (*) will mark the clear coat line along with an explanation to indicate that a preset threshold has been enforced for clear coat.

  1. In the estimate profile, click the Calculations tab.
  2. In the Refinish Calculations section, fill in the desired Clear Coat percentage for Panel 1, Panel 2, or number of units for Panel Max, and Estimate Max. You can enter any positive value between 0.0 - 99.9.
  1. Click Apply Changes.
  2. In the estimate editor add the repair lines. The system consolidates the entire clear coat labor units into a single line taking into consideration the overlap rules. The clear coat value will be calculated as usual until the estimate max value is reached.

    When the maximum value is reached, The asterisk (*) sign is automatically displayed next to the units value in the clear coat line to indicate the system updated the value to the maximum allowed.

If your role is enabled for the lookup table functionality for estimate profiles, you can configure lookup tables for any given field in the profile (e.g., Taxable Settings). This will allow the lookup table wizard to apply the estimate profile correctly, based on the fields specified in the profile.

To configure the lookup table wizard, you must be in WorkCenter with a Lookup Table manager role (LTMANAGER).

The fields that have Lookup Tables set up for them have the -- symbol as the value in the estimate profile and in the Settingssection in Mitchell Connect. To view the values that are associated with the job (due to hierarchy, zip code, etc.), navigate to the estimate profile from the estimate.

Note: The Group and Sub-Group fields on the Lookup Table Wizard are automatically selected based on the fields that table is being applied to.

  1. In the estimate profile, click the Adjustments tab to make adjustments to parts.

  2. In the Adjustments section, configure the applicable options:
  • Add markup or discount (-) – Any markup or discount added below will apply to all parts added in Mitchell Cloud Estimating.
  • Pre-Tax Discount – Any discount added here will apply to Parts, Labor, and Costs individually. The discount does not apply to Tax amount.
  1. In the Display Options section, configure the applicable option:
  • Show/Hide Markups or Discounts – Determine whether or not profile driven Markups and Discounts will display in the repair lines of the estimate. Markups and Discounts will always be calculated in the itemized total and displayed on the estimate printout.
  1. When you are finished making changes, click Save.

Note: The markup or discounts you set in the Estimate Profile apply to all parts added in Mitchell Cloud Estimating.

In the Messages and Remarks tab of the estimate profile in Mitchell Cloud Estimating you can add commonly-used messages and remarks that will be included in every estimate created with the profile. This allows you to save specific messages that will appear on the estimate. You can type the message in the message boxes, or add saved text messages that have already been created. Visit the "Shop Settings" topic for instructions to createsaved textfor the messages and remarks section.

In the Messages and Remarks tab, when editing, make changes to the following information as needed:

  • Messages can be printed on every estimate for this profile.

  • Separate Messaging for Related and Unrelated Estimates
  • Saved Text Messages

Select the check box to enable separate messaging for Primary, Related, and Unrelated estimate types in the estimate profile. You can type the message in the message boxes, or add saved text messages that have already been created. Visit the "Shop Settings" topic for instructions to create saved text for the messages and remarks section. This messaging will be included in the estimate printout.

Saved Text Messages

Note to Staff Appraisers: Saved Text created can be used by all other staff appraisers. Only the original author can edit and delete the text. However, staff managers can update or delete predefined text created by any staff user.

Note to Shop Users: Saved Text created is only available to the shop you use.

  1. Click the Estimate Profile icon and click the Messages and Remarks tab to add messaging to printed estimates created using this profile.
  2. Click Edit and then click + Add Saved Text in each section.

    In the Predefined Text window you can search for existing predefined text. To sort the predefined text, click the Sort By list and select: Title, Updated Date or Created By. You can also sort alphabetically.

  3. Select the predefined text you want to use and click Insert. You can select multiple messages to add to the estimate profile at once. Messages appear in the order they were selected. Messages can be re-ordered on the estimate profile with the arrow icons.


  5. Click Remove to delete predefined text from the estimate profile.

    6. Note: Shops working on assignments for insurance companies that have predefined text will see both a Company tab and a User tab when adding text to the estimate profile.

Insurance companies can set whether or not appraisers have access to edit Messages in the Estimate Profile settings. In WorkCenter, navigate to the Message and Remarks page of the Estimate Profile. Activate or deactivate the Allow Appraisers to Edit toggle depending on your company requirements. If the setting is deactivated, appraisers in Mitchell Cloud Estimating see read-only text in the Estimate Profile Message and Remarks section when editing the settings.

Insurance companies can set whether or not appraisers have access to edit Estimate Styles in the Estimate Profile settings. In WorkCenter, navigate to the Print Preference Estimate Styling tab on the Estimate Profile. Activate or deactivate the Allow Appraisers to Edit toggle depending on your company requirements. If the setting is deactivated, appraisers in Mitchell Cloud Estimating see read-only text in the Estimate Profile Message and Remarks section when editing the settings.

Print Preferences Tab

You can modify settings on the Print Preferences tab for the selected Estimate Profile in order to customize the information displayed on the customer estimate report/printout. As long as the correct Estimate Profile is applied, results of these changes can be viewed, printed, shared, and exported on the PDF Preview tab of the Estimate Editor.

Follow the steps to customize the estimate report/printout:

  1. On the navigation pane in Mitchell Connect, click Settings.
  2. On the estimating card, click Estimate Profiles and then click + Estimate Profile. (Alternatively, create or modify an estimate profile in WorkCenter or within an estimate.)
  3. Click the Print Preferences tab of the Estimate Profile.

  1. Make changes to the Print Preferences tab as desired:

    • Estimate Customization - Information that prints on the estimate header that you give to customers. The sections include:
      • Estimate Header - Logo, Header Information, and Total Loss.
      • Contact - Owner, Claimant, Insured, Appraiser/Supplementer, Insurance Adjuster, Insurance Carrier, and Underwriter.
      • Insurance - General Information and Additional Information.
      • Vehicle - Vehicle Information.
      • Additional Information - Additional Content included below the estimate lines and Parts Profile Information includes or excludes Parts Profile details above the estimate lines.
    • Report Configuration - Include additional documents when your estimate is shared such as related prior damage, unrelated prior damage, supplement delta report, and refinish materials calculator report.
    • Estimate Styling - Edit size, weight, alignment, and indent of the front in the Messages and Disclaimer text sections and set the page margin width.
      • Messages and Disclaimer Text - Messages: Top of Estimate, Messages: End of Estimate, Remarks, Alternate Part Disclaimer, and Fraud Disclaimer.
      • Page Margins - Left and Right margin width for PDF printout.

Note: Selecting and deselecting options determines if the fields will be displayed/printed on the estimate report/printout.

  1. Navigate to an estimate that is using the estimate profile.
  2. Click Preview in the left navigation panel to view the estimate report/printout. Notice that any changes made to the \ section of the Estimate Profile are applied appropriately.
  1. In the estimate profile you are creating, click the Parts tab.
  2. In the Alternate Parts Profiles section, select the alternate parts profile to apply from the list.
  3. Set the vehicle age (in years) and the odometer reading to determine when an alternate parts search will be enabled. You can also select the conditional aspects of how the vehicle age and odometer are applied to alternate part profile selection. You can choose the OR selector so that you can apply an alternate parts profile based on the vehicle odometer reading OR the vehicle age. Select from the following conditional options:
    • Less Than
    • Less Than or Equal To
    • Greater Than
    • Greater Than or Equal To
    • Not Equal To

    Note: If you do not set the vehicle age or odometer reading, the alternate parts search will be enabled for all vehicles.

  4. Select the profile that will be used for all other scenarios.
  5. In the Alternate Parts Search Rules section, configure the settings for the following features as desired:
    • Vehicle Age Calculator - determine how the vehicle age will be calculated for alternate parts profiles.
    • Part Auto-Substitution - edit automatic part preferences.
    • Required Part Comparison - require a parts comparison for parts over a dollar amount you set.
    • Recycled Parts Search Preferences - determine the source of recycled parts in a search.
      • All Interchange Parts - default setting resulting in widest search.
      • [#] Years Before Model Year Or Newer - filters recycled parts from Alternate Parts Vendors by selected year range from the Model year of the vehicle.
      • Same Model or Newer - fewer part matches in search.
      • No Interchange Parts - least recycled part matches in search.
    • QRP Search Preferences - Exclude the highest and lowest price parts for auto substitution.

  1. In the Custom Part Labels for Estimate Printout section, customize the report labels and their descriptions that appear on the estimate printout in order to comply with state regulations.

  2. Click Save when you are finished creating the estimate profile.

Reference

Setting Name Description Configurable Options
Profile Name

Selected Estimate Profile name

 Change the Estimate Profile using the Change Profile link above the General tab. The Select an Estimate Profile window opens for profile search and selection
Description

Selected Estimate Profile description

When setting up the profile in Mitchell Connect, a description of up to 250 characters can be written for later reference in Mitchell Cloud Estimating
Legislation State If applicable, select the state for the Estimate Profile Use the list to select the desired state
Total Loss Threshold This threshold determines when Mitchell Cloud Estimating notifies you about a potential total loss. Set Total Loss Threshold percentage
Primary Template (Long Expansion) If applicable, select the desired Template for additional estimating items specific to your business that are not included in the repair operations (towing, storage, broken glass cleanup, etc) Use the list to select from the available templates
Setting Name Description Configurable Options
Tax Type  

Select either Flat Tax or Tiered Tax. The configurable options change depending on the selection:

  • Flat Tax - Set either a Labor Tax and/or a Parts & Costs Tax percentage

  • Tiered Tax - Set whether or not the Labor Tax and/or Parts & Costs Tax applies along with Tier 1 and Tier 2 percentages from $0.00 to the amount of your choice

Setting Name Description Configurable Options
Labor  

Activate or deactivate the following settings:

  • Body

  • Bdy-S

  • Refinish

  • Glass

  • Frame

  • Mechanical

  • Carbon Fiber

  • Aluminum Repair

  • User Defined 1

  • User Defined 2
Parts  

Activate or deactivate the following settings:

  • New

  • Qual Recycled Part

  • Recorded

  • Rechromed

  • Remanufactured

  • Sublet

  • Aftermarket New
Additional Costs  

Activate or deactivate the following settings:

  • Freon & Oil

  • Towing

  • Storage

  • Coolant

  • Shipping

  • Lubricants

  • Rust Coating

  • Shop Materials

  • Paint/Materials

  • Estimate Charge

  • Detail/Cleanup

  • Apperance Allowance

  • Hazardous Waste Disposal

  • Spcl Paint Materials

  • Flex Additive

  • Cavity Wax

  • Weld Thru Primer

  • R12 Feon & Oil

  • R134A Freon & Oil

  • Caulking Materials

  • Rental

  • Additional Body Materials

  • R123ryf Freon & Oil

  • Car Cover

  • Corrosion Protection Materials
Setting Name Description Configurable Options
Clear Coat

Adjust how Clear Coat is calculated from the base Refinish

Clear Coat is 40% of Refinish hour for the first major panel and 20% for additional panels

 Set Pane 1 and Panel 2 percentages and the units for Panel Max and Estimate Max
Three Stage

Adjust how Three Stage is calculated from the base Refinish

Three Stage is 70% of Refinish hour for the first major panel and then 40% for additional panels

 Set Panel 1 and Panel 2 percentages
Two Tone

Adjust how Two Tone is calculated from the base Refinish

Two Tone is 50% of Refinish hour for the first major panel and 30% for additional panels

 Set Panel 1 and Panel 2 percentages
Blend

Adjust how Blend is calculated from the base Refinish

Blend is 50% for Two Stage and 70% for Three Stage

 Set Two Stage and Three Stage percentages
Finish Sand & Buff

Adjust how Finish Sand & Buff is calculated from the base Refinish

Finish Sand & Buff is 30% of Refinish hour for each surface area.

 Set the Percent of Adjustment
De-Nib & Finesse

Adjust how Finish Sand & Buff is calculated from the base Refinish

De-nib & Finesse is 20% of Refinish hour for each surface area

 Set the Percent of Adjustment
Refinish Adjustment

Adjust the base Refinish hour

By default, there is no adjustment needed. Default value is 100%

 Set the Percent of Adjustment
Setting Name Description Configurable Options

Paint

Calculation is hourly Set the numerical rate price, rate max units, additional rate price, and/or the maximum allowed numerical rate

Shop

Calculation is hourly Set the numerical rate price and maximum allowed numerical rate

Hazardous Waste

 Calculation is hourly Set the numerical rate price and maximum allowed numerical rate
Setting Name Description Configurable Options
Non Repair Lines

Include or exclude non-repair lines when calculating shop materials.

Refinish lines are excluded

 Select to include non-repair lines in shop material's calculation
Paint Limit Explanation Lines Include or exclude an explanation line when paint limit is exceeded Select to include explanation lines when paint limit has been exceeded
Clear Coat Labor Time

Include or exclude Clear Coat Labor Time for Interior Structures

This setting does not apply for Commercial Vehicles

 Select to add clear coat labor time by default for interior structures
Setting Name Description Configurable Options
Automatic PDR Explanation Lines Select whether to automatically include or exclude PDR explanation lines when PDR repair lines exist Select to include PDR explanation lines automatically
Automatic PDR Sublet Adjustment Select whether to automatically include recommended calibration lines Select to apply adjustment on PDR sublet lines automatically
Setting Name Description Configurable Options
Recommended Calibration Lines Select whether to automatically include recommended calibration lines Select to include recommended calibration lines automatically
Setting Name Description Configurable Options
Repair Breakeven Minimum Threshold

Set the minimum percentage threshold for recommending Remove & Replace (R&R) instead of Repair

Enter a value from 50 to 100 only

 Set the minimum threshold percentage
Setting Name Description Configurable Options
Add Markup or Discount (-) Any markup or discount added below will apply to all parts added in Mitchell Cloud Estimating

Set the following percentages for each desired setting:

  • New

  • Qual Recycled Part

  • Recored

  • Rechromed

  • Remanufactured

  • Sublet

  • Aftermarket New
Pre-Tax Discount

Any discount added here will apply to Parts, Labor, Costs individually

Discount will not apply to the Tax amount

 Set the discount percentage
Setting Name Description Configurable Options
Show/Hide Markups or Discounts

Determine whether or not profile driven Markups and Discounts will display in the repair lines

Markups and Discounts will always be calculated in the itemized total and displayed on the estimate printout

 Choose to show or hide profile driven markups and discounts
Setting Name Description Configurable Options
Messages Checkbox

 

 Choose to use or hide separate messaging for Related and Unrelated Estimates
Top: Print between the header and estimate lines   Add saved messages from user and/or company records from the Saved Text window
Bottom: Print under the estimate lines   Add saved messages from user and/or company records from the Saved Text window
Setting Name Description Configurable Options
Logo   Choose to include a logo in the header of the estimate
Header Information Choose a default header or create a custom header with specific information Choose to use a default estimate header or a custom estimate header for the estimate
Total Loss   Include or exclude total loss in the header of the estimate
Setting Name Description Configurable Options
Owner  

Select the fields shown in the estimate report:

  • Owner First Name

  • Owner Last Name/Company

  • Owner Address (all address information or city/state/zip code only)

  • Owner Email Address

  • Work Phone

  • Mobile Phone

  • Home Phone

  • Fax Number

  • Other Phone Number
Claimant  

Select the fields shown in the estimate report:

  • Claimant First Name

  • Claimant Last Name/Company

  • Claimant Address (all address information or city/state/zip code only)

  • Claimant Email Address

  • Work Phone

  • Mobile Phone

  • Home Phone

  • Fax Number

  • Other Phone Number
Insured Insured contact information will not be shown when claimant or owner contact information is present

Select the fields shown in the estimate report:

  • Insured First Name

  • Insured Last Name/Company

  • Insured Address (all address information or city/state/zip code only)

  • Insured Email Address

  • Work Phone

  • Mobile Phone

  • Home Phone

  • Fax Number

  • Other Phone Number
Appraiser / Supplementer / Corrector  

Select the fields shown in the estimate report:

  • First Name

  • Last Name

  • License Number

  • Estimate Classification

  • Email Address

  • Work Phone

  • Mobile Phone

  • Home Phone

  • Fax Number

  • Other Phone Number
Insurance Adjuster  

Select the fields shown in the estimate report:

  • Adjuster First Name

  • Adjuster Last Name

  • Adjuster Email Address

  • Work Phone

  • Mobile Phone

  • Home Phone

  • Fax Number

  • Other Phone Number
Insurance Carrier  

Select the fields shown in the estimate report:

  • Insurance Company Name

  • Insurance Company Address (all address information or city/state/zip code only)

  • Insurance Company Email Address

  • Work Phone

  • Fax Number

  • Website

  • EPA Number

  • Tax ID

  • Bar ID
Underwriter  

Select the fields shown in the estimate report:

  • Underwriter Name

  • Underwriter Address (all address information or city/state/zip code only)

  • Underwriter Email Address

  • Work Phone

  • Fax Number

  • Website

  • EPA Number

  • Tax ID

  • Bar ID
Additional Information Checked item will include all Contact fields defined by the insurance company

Select to include or exclude all contact fields defined by the insurance company
Setting Name Description Configurable Options
General Information Checked items will include all information associated with it (i.e., address and phone numbers)

Select the fields shown in the estimate report:

  • Payer

  • Loss / Product Type

  • Claim Number

  • Policy Number

  • Deductible

  • Report Date

  • Loss Date

  • Inspection Site

  • Inspection Date

  • Loss Description

  • Title (manual entry)

Additional Information Checked item will include all Insurance fields defined by the insurance company Select to include or exclude all insurance fields defined by the insurance company
Setting Name Description Configurable Options
Vehicle Information  

Select the fields shown in the estimate report:

  • Exterior Color

  • Interior Color

  • Trim Color

  • License

  • VIN

  • Unit ID

  • Condition

  • Drivable Status

  • Odometer

  • Production Date

  • Mitchell Service Code

  • Primary Point of Impact

  • Secondary Point of Impact

  • Prior Damage Notes

  • Vehicle Options

  • Damage Description
Additional Information Checked item will include all vehicle fields defined by the insurance company Select to include or exclude all vehicle fields defined by the insurance company
Setting Name Description Configurable Options
Additional Content Indicate what items to include below the estimate lines

Select the fields shown in the estimate report:

  • Cycle Time

  • Estimate Event Log
Parts Profile Information Checked item will include Parts Profile details above the estimate lines

Select the fields shown in the estimate report:

  • Parts Profile

  • Parts Profile Version
Setting Name Description Configurable Options
Primary Estimate Choose your estimate report format

Choose between the following options:

  • Standard

  • Include CEG Values

  • Show Labor $ Amount
Print With Select additional documents to include when your estimate is shared

Select the documents to include alongside the estimate report:

  • Related Prior Damage

  • Unrelated Prior Damage

  • Supplement Delta Report

  • Refinish Materials Calculator Report
Setting Name Description Configurable Options
Messages: Top of Estimate  

Choose the following for the messages and disclaimer text typography:

  • Font size (10pt - 16pt)

  • Bold

  • Alignment (Left, Center, Right, Justified)

  • Indented
Messages: End of Estimate  

Choose the following for the messages and disclaimer text typography:

  • Font size (10pt - 16pt)

  • Bold

  • Alignment (Left, Center, Right, Justified)

  • Indented
Remarks  

Choose the following for the messages and disclaimer text typography:

  • Font size (10pt - 16pt)

  • Bold

  • Alignment (Left, Center, Right, Justified)

  • Indented
Alternate Part Disclaimer  

Choose the following for the messages and disclaimer text typography:

  • Font size (10pt - 16pt)

  • Bold

Fraud Disclaimer  

Choose the following for the messages and disclaimer text typography:

  • Font size (10pt - 16pt)

  • Bold

Setting Name Description Configurable Options
Alternate Parts Profiles Choose the conditions when the alternate parts profiles should be used

Choose the vehicle age and odometer miles/km parameters in order to use the alternate parts profile

Choose the alternate parts profile to use in all other scenarios that do not fit into the first set of parameters
Setting Name Description Configurable Options
Vehicle Age Calculator Determine how the vehicle age will be calculated for alternate parts profiles

Choose between the following options:

Start Date

  • Model Year

  • Production Date When Available

End Date

  • Current Date

  • Date of Loss When Available
Part Auto-Substitution Choose whether or not to automatically select the most cost-effective alternate part when adding parts to the estimate

Choose between the following options:

  • Auto-Substitute OFF

  • Auto-Substitute ON

  • Auto-Substitute ON, Excluding Recycled Parts
Required Part Comparison Choose whether or not to require alternate part comparison for all parts or for alternate parts over a certain price

Choose between the following options:

  • Parts Compare Not Required

  • Parts Compare Required for Parts Over dollar amount manual entry
Recycled Parts Search Preferences Determine the source of recycled parts as well as what specific recycled parts are shown

Choose between the following options:

  • All Interchange Parts

  • # Years Before Model Year or Newer

  • Same Model Year or Newer

  • No Interchange Parts
QRP Search Preferences Exclude the highest and lowest price parts for auto substitution

Choose between the following options:

  • Always Include Outliers

  • Exclude Outliers Only For Auto-Substitute
Setting Name Description Configurable Options
New   Enter a new Report Label and/or Report Label Description if desired
OE Discount   Enter a new Report Label and/or Report Label Description if desired
Aftermarket Certified   Enter a new Report Label and/or Report Label Description if desired
Aftermarket New   Enter a new Report Label and/or Report Label Description if desired
Remanufactured   Enter a new Report Label and/or Report Label Description if desired
Qual Recycled Part   Enter a new Report Label and/or Report Label Description if desired
Sublet   Enter a new Report Label and/or Report Label Description if desired
Recored   Enter a new Report Label and/or Report Label Description if desired
Rechromed   Enter a new Report Label and/or Report Label Description if desired
Existing   Enter a new Report Label and/or Report Label Description if desired
Related Topics Link IconSee next
Related Topics Link IconRelated topics